PMC Anti-Spatter Spray (PS-1)


ANTI-SPATTER PS-1 provides a thin, oily, heat resistant barrier which prevents the adhesion and build up of weld spatter on workpiece and associated equipments,


Shake the can thoroughly before use.
Hold in an upright position, spraying directly onto the component surface from a distance of B-12 inches.
The highly directional button ensures accurate positioning of the lubricant.
Always ensure any guarding is in place when treating moving equipments.
Re-apply as required


a Any weld spatter may be easily removed by wiping with a cloth or similar.
a The product does not affect the quality of the weld.
a Contains no CFC, propellants – ozone friendly.
a Does not contain chlorinated solvents.
a Eliminates the need for chiseling, Grinding or Brushing after welding.
a Non-Toxic, Non-Flammable.


a Aerosol can capacity – 525ml
a Net content – 400ml I 210gm
a Aerosol can capacity – 330ml
a Net content – 280ml I 140gm


a Pressurised container.
a Protect from sunlight and do not expose to temperatures exceeding 50 °C.
a Do not pierce or burn, even after use.
a Do not spray on a naked flame, or any incandescent material.

Health, Safety and Environment – information is provided for products in the relevant Safety Data Sheet. This provides guidance on potential hazards, precautions and first-aid measures, together with environmental effects and disposal of used products.

While the information and figures given here are typical of current production and conform to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the infofmation or the suitability of the products.